Course 404B Pneumatic Conveying


Bibliography

 
Pneumatic Conveying
 
  1. Zenz, F.A., Othmer, D.F: Fluidization and Fluid Particle Systems, Reinhold, New York (1960)

  2. Stoess, H.A. Pneumatic Conveying, Wiley, New York (1983)

  3. Boothroyd, R.G., Flowing Gas-Solids, Chapman & Hall, London (1971)

  4. Handbook of Conveying and Handling of Particulate Solids, Elsevier, Eds. Kalman H. and Levy, A. (2001)

  5. Powder Technology Handbook, 3rd Edition, Eds. Masuda, H., Higashitani, K., and Yoshida, H. (2006)

  6. Klinzing, G.E., Rizk, F., Marcus, R., Leung, L.S., Pneumatic Conveying of Solids, 3rd Edition, Springer, Dordrecht (2010)

  7. Kraus, M.N., Pneumatic Conveying of Bulk Materials, McGraw-Hill, New York (1980)

  8. Soo, S.L., Fluid Dynamics of Multiphase Systems, Blaisdell, Waltham, MA (1967)

  9. Allen, T., Particle Size Measurement, 2nd Edition, Chapman and Hall London (1975)

  10. Richardson, J.F., Zaki, W. N., Chem Eng. Sci, 3, 65-73 (1954)

  11. Ergun, S. Chem. Eng. Prog, 48, 89-94 (1952)

  12. Kaye, B.H., Characterization of Fine Particles, Wiley, New York (1981)

  13. Konno, H., Saito, S. J., Chem Eng Jpn, 2, 211 (1969)

  14. Govier, G.W. Aziz, K., The Flow of Complex Mixtures in Pipes, van Nostrand Reinhold, New York (1972)

  15. Klinzing, G.E., Gas Solid Transport, McGraw-Hill, New York (1981)

  16. Ito, H. Trans. ASME, J. Basic Eng., 81D, 123 (1959), 131 (1960)

  17. Muschelknautz, E., Krambrock, W., Chemie-Ing. Tech. 41, 1164 (1969)

  18. Hinkle,B.L., PhD Dissertation Georgia Institute of Technology, Atlanta, GA (1959)

  19. Tsuji, Y., Proceedings of the 5th World Congress on Particle Technology, Orlando, FL, A.I.Ch.E. Plenary Lecture, Paper 109 (2006)

  20. Theurkauf, S. Chemical Engineering, April, pp 39-46 (2007)

  21. Molerus, O., Chem. Eng. Techno., 39,341-348 (1967)

  22. Barth, W., Chem.- Ing. Tech, 20 (1), 29-32 (1954)

  23. Rose, H.E., Duckworth, R.A., Engineer 227, 3920396, 430-433, 478-483 (1969)

  24. Bagnold, R.A., The Physics of Blown Sand and Desert Dunes, Methuen, London (1941)

  25. Cabrejos, F.J., Klinzing, G.E., Powder Tech. 79, 173-186 (1994)

  26. Rabinowitz, E., Kalman, H., Powder Tech, 176, 9-17, (2007, 183, 304-312 (2007), 185, 67-79 (2008)

  27. Rizk, F., Dissertation, University of Karlsruhe, Karlsruhe, Germany, (1073)

  28. Dixon, G., Butters Editor, Plastic Pneumatic Conveying and Bulk Storage, Applied Science Publisher, Reading, MA (1981)

  29. Weber, M., Stromungs-Fordertechnik, Krausskopf Verlad, Mainz, Germany (1973)

  30. Tsuji, Y., Morikawa, Y., Int. J. Multiphase Flow 8, 657-667 (1982)

  31. Matsen, J.M., Powder Tech, 7, 93-96 (1993)

  32. Knowlton, T.M., Hirsan, I., Hydrocarbon Process, 57,149-156 (1978)

  33. Konrad, K., Harrison, D. Nedderman, R.M., Davidson, J.F., Proceedings of the 4th International Conference on Pneumatic Transport of Solids in Pipes, BHRA Fluid Engineering, Cranfield (1978)

  34. Dhodapkar, S.V., Plasynski, S.I., Klinzing, G.E., Powder Tech, 81, 3-7 (1994)
 

Copyright © 2011, 2012 George Klnzing and Ken Sochats